Images are for reference only. The supplied part’s appearance may differ.
6205-2RSH deep groove ball bearing
ball bearingPart number: 6205-2RSH
The SKF 6205-2RSH is a single-row deep groove ball bearing measuring 25 mm bore by 52 mm outside diameter by 15 mm wide. Its contact seals on both sides help retain lubricant and exclude contaminants. It has CN normal radial internal clearance and can accommodate radial loads and axial loads in both directions.
Looking for SKF 6205-2RSH? This catalogue reference is listed under ball bearing. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | SKF |
|---|---|
| Part number | 6205-2RSH |
| Category | Bearings & motion |
| Bore diameter | 25 mm |
| Outside diameter | 52 mm |
| Width | 15 mm |
| Basic dynamic load rating | 14.8 kN |
| Basic static load rating | 7.8 kN |
| Limiting speed | 8500 r/min |
| Sealing | Contact seals on both sides |
| Radial internal clearance | CN (normal) |
| Availability | On request |
| Number of rows | 1 |
| Bearing material | Bearing steel |
| Fatigue load limit | 0.335 kN |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What are the dimensions of the SKF 6205-2RSH bearing?
The bore is 25 mm, the outside diameter is 52 mm and the width is 15 mm. Dimensions alone do not establish equipment fitment; provide the equipment model, serial number and existing bearing designation for verification.
What does 2RSH mean, and is this bearing sealed on both sides?
Yes. The 6205-2RSH is sealed on both sides; SKF identifies 2RSH as a contact-seal design. The seals help retain grease and exclude contaminants, but suitability depends on the operating conditions.
Does the SKF 6205-2RSH have normal or C3 internal clearance?
The listed 6205-2RSH has CN, or normal, radial internal clearance. Check the full designation and the equipment requirements before replacing a bearing with a different clearance suffix.
What are the load ratings and limiting speed of the 6205-2RSH?
Its basic dynamic load rating is 14.8 kN, its basic static load rating is 7.8 kN, and its listed limiting speed is 8,500 r/min. These ratings alone do not establish suitability for a particular machine or duty cycle.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.